Free audit
Guide

How to read a Google Maps rank grid: 6 common shapes and what to check for each

Short answer: a rank grid runs one Google Maps search from many points around a business and shows the position at each point. Read it in three steps: first the numbers (how many points are in the top 3, and how many find you at all), then the shape of the colors, then the competitor who leads where you are weak. Six shapes are worth knowing: a bullseye, a lopsided map, an island away from your pin, a hole in the middle, a ghost that is barely found, and a patchwork. Each one points to a different first check. One scan is a snapshot, so confirm a shape with a second scan before you act.

Most guides to grids are product manuals: they explain one vendor's metrics and stop there. This guide is about the picture itself, so it works with any grid tool. The grids below are illustrative examples we made for this page, not scans of real businesses.

What a rank grid shows

Google says local results are "mainly based on relevance, distance, and popularity", and defines distance as "how far each business is from the customer who's searching" (Google Business Profile Help, read November 11, 2026). Because distance is measured from the searcher (see proximity), a business has no single Maps rank. A grid makes that visible: same keyword, same moment, many starting points.

In Pack Leader's grids, each point shows your position in the top 20 Maps results from that spot:

Color Position What it means at that point
Green 1 to 3 You are in the Maps top 3
Amber 4 to 10 On the first page, below the top 3
Red 11 or lower Far down the list
20+ Not in the top 20 We did not find you there

In the example grids below, C marks the grid center (your business location), and each cell is a rank.

Step 1: read the numbers before the colors

Three numbers tell you more than any single point:

  • Top 3 areas: how many points show you in the top 3. This is the number to grow.
  • Found at: how many points show you anywhere in the top 20. A low number here is a different problem from a low top 3 count.
  • Average map rank: the average position across all points. Pack Leader counts a point where you were not found as 21, so one missing point pulls the average up a lot.

Worked example (illustrative numbers): on a 5×5 grid, a business is green at 9 points, amber at 8, red at 6 and 20+ at 2. Top 3 areas: 9 of 25 (36%). Found at: 23 of 25. If the 2 missing points were counted as 21, they alone add 42 to the total, which is why the average can look worse than the map feels.

Step 2: name the shape

1. The bullseye: green in the middle, red at the edges

 12  8  6  9 15
  7  3  2  3 10
  5  2 C1  2  6
  8  3  2  4 11
 14  9  7 10 20+

This is the shape distance alone would produce. Customers close to your business see you first; farther out, businesses closer to them take over.

Check first: at the red edge points, who is #1, and are they closer to that point than you? If yes, that is distance, which you can't change. If they are no closer, the gap is in relevance or prominence, which you can work on. Our guide to distance and Google Maps covers this case.

2. The lopsided map: strong on one side only

  2  3  8 14 20+
  1  2  6 12 18
  2  1 C3  9 15
  3  2  5 11 17
  4  3  7 13 20+

Green on one side, red on the other. Possible reasons: a competitor cluster on the weak side, or a natural line (a river, a highway, a town border) that separates two markets.

Check first: switch to the competitor view and see who is green on your red side. Then check where that business is on the map. For a service-area business, also check where the grid is centered (see shape 3).

3. The island: your best area is not where your pin is

 20+ 18 15 12 11
 17 12  9  6  8
 15  9 C7  3  4
 14  8  4  1  2
 12  7  3  2  3

The green patch sits away from the center. This can happen with service-area businesses that hide their address, because the grid center is then an estimate, not a point Google publishes. Pack Leader centers a hidden-address business on the middle of the Maps results for its city. Whitespark's Darren Shaw describes ranking drops that happen when Google keeps using the address a business was first verified at (Whitespark, October 2024).

Check first: where was the profile first verified, and did the business move? Read service-area business rank tracking before you change anything about the address.

4. The hole: weak in the middle, stronger around it

  4  3  3  4  6
  5  8 11  9  5
  4 12 C14 10  4
  5  9 12  8  6
  6  5  4  5  7

Worth a closer look. Possible reasons: a dense cluster of similar businesses right around your location, a map pin that sits in the wrong spot, or a keyword that matches a different kind of business downtown.

Check first: hover the center points and list the top 3 there. Then open your profile on Google Maps and check that the pin is on your building.

5. The ghost: 20+ almost everywhere

 20+ 20+ 20+ 20+ 20+
 20+ 20+ 18  20+ 20+
 20+ 16 C15 20+ 20+
 20+ 20+ 19  20+ 20+
 20+ 20+ 20+ 20+ 20+

You are not found in the top 20 at most points. That is a different problem from ranking low.

Check first, in this order: (1) is your profile still live? Search your exact name on Google Maps in a private window. See how to notice profile problems early. (2) Does the keyword match your primary category and services? A roofer scanning "gutter cleaning" can look like a ghost. (3) Did the scan match the right business? If a grid that usually finds you suddenly shows 0 found, go to my Google Maps rankings dropped.

6. The patchwork: no clear pattern

  3 14  2 20+  5
 11  4 16  3 12
  2 13 C1 15  4
 17  3 12  2 19
  4 20+ 5 11  3

Green and red side by side with no geography behind it. Possible reasons: the results are close to a tie between several businesses, or the results moved while the scan ran.

Check first: run the same scan again in a few days. If the pattern changes, treat it as noise. Our guide to local rank fluctuation explains how much movement is normal.

A seventh you may see: the cliff

Green that turns red at one straight line, not gradually. Look at the map under the line: a city limit, a river or a highway often lines up with it. Treat the line as a fact about the market and plan a page for the town on the other side, rather than trying to "fix" the grid.

Step 3: look at who leads where you are weak

The shape tells you where. The leader tells you what. At two or three of your red points, note the top 3 and compare yourself with the business at #1: primary category, reviews and how recent they are, photos, website page for that service. Our guide on why a competitor ranks higher lists what to compare.

Rules that keep you from misreading a grid

  • Compare like with like. Same keyword, same grid size, same radius. A 3×3 and a 7×7 are different measurements. See what grid size and radius to use.
  • One scan is one moment. Look for the same shape twice before you act.
  • Your phone shows one point. A client checking from the office sees their best point. See why my rank is different on my phone.
  • A grid shows where, not why. Google does not publish how it weighs each factor. A grid tells you where to look, then you check the profile and the leader.

Where Pack Leader fits

Pack Leader runs 3×3, 5×5 and 7×7 grids with a radius of 1 to 10 miles, saves every scan, and lines up scans of the same keyword, size and radius on a timeline. The competitor tabs show each rival's own shape, and Diagnose this grid compares you with the top 3 at each point where you miss it, by distance, category, reviews and rating. It describes what it measured. It can't tell you how Google weighs each factor, and it doesn't promise a rank. Full steps are in how to run a local grid scan.

Frequently asked questions

What is a geogrid in local SEO?

A geogrid, also called a rank grid or SEO heat map, runs the same Google Maps search from many points on a map, for example 25 points in a 5 by 5 square, and shows your position at each point. It shows how your rank changes across your area instead of giving one number.

What do the colors on a rank grid mean?

In Pack Leader, green is the Maps top 3, amber is positions 4 to 10, and red is 11 or lower. A point marked 20+ means the business was not found in the top 20 from that spot. Other tools use similar colors, but check each tool's legend.

Why am I green near my office and red across town?

Google says local results are mainly based on relevance, distance and prominence, and distance means how far the business is from the person searching. Searchers close to your business see you first. Farther out, businesses closer to them often take over.

How many scans do I need before I trust a shape?

More than one. Results move from day to day, so look for the same shape in at least two scans with the same keyword, grid size and radius before you change anything big.

Does a grid of all 20+ mean my profile is suspended?

Not by itself. It can also mean the keyword doesn't match your profile, or the scan picked the wrong business. Search your exact business name on Google Maps in a private window first.

Keep reading