Free audit
Gap audit and research

Demand near you: what the storm and permit panel shows, and what it does not

Short answer: Demand near you is a panel in your workspace, under Storms & permits. It shows two things: storm reports near you, if you work in a storm trade, and the building permits your city issued this week in your trade, for Austin and San Diego. The permits show how much work there is and who is doing it. An issued permit is a job that already has a contractor, so it is not a lead. Pack Leader never contacts anyone.

What the panel shows

Storm reports

For roofing, siding, gutters, windows, tree service, restoration and auto glass, the panel lists storm reports within 20 miles of your service area center from the last 7 days. Only reports big enough to matter are shown:

  • Hail of 1.00 inch or larger.
  • Wind of 58 mph or more, or any wind damage report.
  • Any tornado.
  • Flood reports, for restoration only.

Each row gives the event and its size, the place, the distance from your center, the date and time, and a link, "Reported to NWS (preliminary)". A report is what a storm spotter or a member of the public told the National Weather Service. It says that something was reported, not that a roof or a street was damaged, so the row says "reported" and never "damaged". Reports from the last 48 hours carry a quiet "New" marker.

Above the list, "Checked" shows the date and time of the last successful check. There are at most 10 rows before "Show all".

Permits

For roofing, plumbing, HVAC and electrical in Austin and San Diego, the panel shows what your city issued in your trade. Above every permit list you will see:

Permits issued: these jobs already have a contractor.

Under it:

  • The count of permits issued in the last 7 days, and how it changed from the week before.
  • A split by work type, such as repair or change-out, when the week holds more than one type.
  • A weekly trend. It shows only the weeks we hold, so it says "Trend builds weekly" until there are six.
  • The top ZIP codes (paid plans).
  • Who is pulling them (paid plans): the five contractor companies with the most permits, with their counts. If your own company is among them it is marked "You". The match ignores case and punctuation, reads "&" as "and", and drops one ending such as LLC or Inc, so "Peak Roofing LLC" matches "Peak Roofing". A missing word, a typo or a different trade name does not match.
  • The permits themselves (paid plans): permit type, issue date, street, permit number with a link to the city's record, and the contractor. Twenty rows show before "Show all".

In San Diego, rooftop solar is not counted as roofing.

Permits are not leads

A permit is issued for one specific job, and in almost every case a contractor has already been hired for it. By the time a permit shows on this panel, the work has a contractor.

So read the panel as a market view: how many permits your trade has in your city this week, whether that is rising or falling, and which companies are winning the work. It is not a list of homeowners to call, and Pack Leader does not sell it as one. To see how you compare with the businesses that rank above you in your search, use your competitor audit.

Why some rows say "Contractor: not listed" or "Address not published"

  • "Contractor: not listed" means one of three things: the city's record names no contractor; it names only a person; or the name does not read as a business. Pack Leader shows a company name as the city published it, and never shows or keeps a person's name. A row that says not listed is an undercount, not a missing job.
  • "Who is pulling them" can be replaced by a line. Some cities name a company on few permits. When fewer than three companies are named in the period, the panel says "{City} lists a contractor company on few permits, so we can't show who is pulling them." rather than show a table that would mislead.
  • "Address not published" means the city did not publish an address for that permit.
  • Street and ZIP, never a house number. A permit is about someone's home. The panel is for seeing demand, not for knocking on doors, so the house number is never shown or kept.

Contact rules

Every panel ends with this line:

Contact rules are yours: follow CAN-SPAM for email and TCPA for calls and texts. Pack Leader never contacts anyone.

The panel shows no names, phone numbers or emails of homeowners, and Pack Leader sends nothing. If you reach out to anyone because of what you see, the rules are yours to follow: the FTC's CAN-SPAM guide covers commercial email, and the FCC's guide to robocalls and texts covers calls and texts under the TCPA. This is not legal advice.

Where the data comes from

Source What we use License
National Weather Service local storm reports, through the Iowa Environmental Mesonet feed Event type, size, place, time NWS open data, free to use for any purpose
City of Austin Open Data, Issued Construction Permits Permit type, work class, issue date, street, ZIP, permit number, contractor company Public Domain U.S. Government
City of San Diego Open Data Portal, development permit approvals The same fields Open Data Commons Public Domain Dedication and License (ODC-PDDL)

All three are public records. We add no names, phone numbers or emails from anywhere else. The cities say their data is informational and can differ from their own records, so open the link on a row to confirm a permit before you rely on it.

We keep the raw rows for 30 days and then delete them. Only weekly counts by city and trade stay, with no row detail, to draw the trend.

How fresh it is

Storm reports are checked about once a day, and permits once a week. A report can reach the panel up to about a day after the National Weather Service publishes it, and the "Checked" time shows when we last succeeded. The panel does not claim to be live.

If a source fails two runs in a row, its rows are hidden and the panel says "This source did not update this week. We show nothing rather than old data."

Who sees what, and what it costs

Demand near you uses no credits on any plan.

Free Any paid plan
Storm reports How many, and the newest one Every report
Permits The count, the change and the trend Every permit, the top ZIP codes and the companies pulling them

The Free view carries a plan card to upgrade. See credits and plans and pricing.

When you do not see the panel

The panel shows only when your primary category maps to a trade we cover and there is data for it. If not, you see one line instead: "We don't have permit data for {your city} yet." or "Demand near you isn't available for {your trade} yet." Permit data exists for Austin and San Diego only, so a plumber in another city sees the first line, and a locksmith sees the second.

The first time you open it, storm reports can take up to an hour to appear while we find your area, and the panel says so. Storm reports also need your business location, and the panel says so if it is missing.

What it does not do

It does not send alerts by email or text. It does not contact anyone. It does not say a storm damaged anything, and it does not promise you jobs or a better rank.

Frequently asked questions

Are the permits on the panel leads?

No. A permit is issued for a job that already has a contractor. The panel shows how much work your trade has in your city and which companies are doing it. It is not a list of homeowners to contact.

Why does a row say Contractor not listed?

Either the city's record names no contractor, or it names only a person, or the name does not read as a business. Pack Leader shows business names only and never shows or keeps a person's name. A row that says not listed is an undercount, not a missing job.

Does Demand near you use credits?

No. It uses no credits on any plan and has no extra price. Paid plans see every row, and Free sees counts.

Is it real time?

No. Storm reports are checked about once a day and permits once a week. The panel shows when the last successful check ran.

Can I see homeowner names, phone numbers or emails?

No. The panel shows no homeowner names, phone numbers or emails, and no house numbers. Pack Leader never contacts anyone.

Does it work in every city?

Permit data covers Austin and San Diego only. Storm reports show for the storm trades listed above. If neither applies to your business, the panel says what is not available yet.

Related articles